Nortec MH SERIES User Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
10-30
Page 30
2008-12-03
1.2.2 Unit Faults
Warning Error Cause Remedy
LED Display LED Display
External safety chain is
open
Red
and
green
flash
-- Air proving interlock
open.
If applicable,
check/turn on fan.
Air flow monitor
triggered
Check fan/filter of
the fan system.
Safety humidistat
triggered.
Wait, if applicable,
check safety
humidistat
Error level senso
r
Error level senso
r
Red
flashes
Red
lights
The level sensor is
blocked or defective
(broken or short-
circuited).
Check/clean or
replace level
sensor. Check level
sensor with
ohmmeter: If no
water is in the tub,
the circuit of the
level sensor must
be closed. If the
water in the tub is
on maximum
level
sensor must be
open.
Maximum filling time
exceeded (30 minutes)
Maximum filling time
exceeded (more than 4
hours)
Red
flashes
Red
lights
Note: This error
message is reset
automatically as
soon as the water
supply functions
again.
Water supply
blocked/shut-off valve
closed/water pressure
too low. Water
treatment unit (fully
demineralised water)
is regenerating.
Check water supply
(filter, pipes, etc.),
Check/open shut-
off valve, Check
water pressure.
Inlet valve blocked or
defective.
Check strainer in
the inlet valve,
clean if necessary.
Replace inlet valve.
Drain valve open,
blocked in open
position or not
electrically
connected. Drain
valve is open unless
powered
Check/replace
drain valve,
connect drain
valve.
Leakage in the water
drain system.
Check/seal water
drain system.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments