Nortec MH SERIES User Manual download pdf (Page 23)

10-10

Page 19

2008-12-03

1.1.10 Configuring the Humidifier Maintenance Interval

Select “Maintenance” in the settings menu,

then press the <Set> key. In the following

dialogue set the desired maintenance interval

time in hours. After the maintenance interval

time has elapsed a maintenance message

appears in the display and the yellow LED

lights up. If the maintenance is not performed

and the maintenance indication is not reset

within a certain time (168 h) , an error

message is triggered. Factory setting: 800 h

Setting range: 100... 50000 h

Note: to determine the maintenance interval

time please refer to 1.3 in section 10-40 of the

installation and operating instructions for the

Nortec MH.

1.1.11

Activating/deactivating the softstart function

If the mats in the humidifier boxes became dry due to a operation interruption, they

need a certain time until they are again moistened with water. In order to prevent too

much water flows over the humidification boxes in this phase and water droplets are

carried in the air flow, the amount of water can be reduced for a fixed time with the

“Softstart” function.

Select “Softstart” in the settings menu, then

press the <Set> key. In the modification

dialogue you can activate or deactivate the

softstart function. Factory setting: Off Options:

Off (Softstart function deactivated)

On (Softstart function activated)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 39 40

No comments

Nortec MH SERIES User Manual Page 23